Golf Course Bulkhead Repair & Reinforcement

Fast, Noninvasive, & Cost-Effective Solutions for Golf Course Bulkheads Across USA

NSquare, Inc. of Southwest Florida serves the continental United as a contractor company who specializes in the repair & structural reinforcement of golf course bulkheads. We repair these bulkheads using the DSMS™ Dynamic Seawall Maintenance System™-- the noninvasive solution to both prevent and repair bulkheads while protecting your green.

If sinkholes are beginning to appear in the soil adjacent to your golf course bulkhead, it's a sign of imminent bulkhead failure. Structures such as this are prime candidates for the DSMS™ system. The DSMS™ system prevents bulkhead failure, while extending the life of the structure and eliminating the need for expensive and disruptive bulkhead replacement.

The DSMS™ system is the ideal way to repair failing bulkhead systems with minimal disruption to landscaping, while the flexibility and speed of installation allows the contractors to work around the golf course's schedule. By installing the DSMS™ system while the golf course is not in use, they eliminate all loss of revenue to the property owner.

What Makes the DSMS™ Golf Course Bulkhead Tieback & Anchoring System Unique

The DSMS™ Golf Course Bulkhead Tieback & Anchoring system provides a unique approach to bulkhead repairs and maintenance-- one that make repairs possible for otherwise irreparable wall systems. It offers the following advantages:

Noninvasive Installation: The DSMS™ System installs from the waterside-- with no need to excavate the green, including fairways, irrigation systems, or even waterside docks and structures. There is no heavy, landscape-damaging machinery involved, and there are no lengthy permitting requirements. In most cases, a 3" long-wheeled hydraulic rig is the largest piece of equipment needed on the course.

Cost-Effective: The DSMS™ Dynamic Seawall Maintenance System™ is less expensive to install than full wall replacement.

Flexible Installations: Golfers will not be turned away from your course due to the disruption caused by heavy equipment and the long recovery time associated with traditional wall reconstruction.

A Durable, Long-Lasting Solution: Each anchor may be removed for reuse or adjustment after installation. DSMS™ anchors can bear loads of 7,500 tensile pounds, compared to 5,000 tensile pounds for dead man anchors. For long life and durability, we recommend marine-grade type 304 stainless steel in hostile environments in addition to our standard galvanized anchors.

Time-Honored Repairs: The helix earth screws used with the DSMS™ system are a respected, long-honored repair method that's been used for years in other industries. DSMS™ has been field-tested in numerous locations and are highly praised by golf course superintendents, board presidents, and property owners.

Fast, Effective Installations: Repairs can be completed quickly and effectively, in roughly 8-10 hours for an 80-foot wall. This is much less time than it would take to rebuild the bulkhead or complete other repair methods.

Environmentally Friendly: The DSMS™ system has been praised by environmental agencies throughout Florida for lessening the negative environmental impact of traditional bulkhead installations on bodies of water.

A Dynamic Seawall Tieback & Anchoring System

The DSMS™ system can be used for a variety of applications, some of which would not be possible with traditional "dead man" supports used otherwise. The system can work around structures, landscaping and docks without disruption and can be installed at or below the waterline without a problem.

DSMS™ anchors can also be used on floating ducks, bulkheads, golf courses, and virtually any type of retaining wall, whether or not water is involved.

DSMS™ has been recognized by the City of Marco Island, the City of Naples, Collier County, the City of Bonita Springs, Lee County's Division of Environmental Sciences, and the South District Office of the Department of Environmental Protection as a viable solution to seawall maintenance problems. Numerous engineers have given their approval and Marine Contractors from around the nation have praised the system as much more efficient and much less invasive in comparison with traditional methods of seawall maintenance.

Florida Installation of DSMS™ Golf Course Bulkhead Anchors

NSquare, Inc. of Florida is available for installation of DSMS™ Golf Course Bulkhead Anchors & Tiebacks for residential, commercial, industrial, government, and municipal properties as well as for new construction applications.

We serve across the continental United States for golf courses for all types. For more information about golf course bulkhead repair, contact us by phone or e-mail today!

Golf Course Bulkhead Repair Gallery - Click on any image below to see the full size.